Rivets

Emhart Blind POP Rivets	Alcoa Huck/Marson Rivets	Acument Avdel Rivets
OPEN END POP RIVETS	OPEN END POP RIVETS	AVEX MULTIGRIP RIVETS
CLOSED END POP RIVETS	KLIK-LOK PLASTIC RIVETS	STAVEX MULTIGRIP RIVETS
MULTIGRIP POP RIVETS	HUCKLOK RIVETS	AVDEL CLOSED END
ULTRAGRIP HIGH STRENGTH	HUCK MAGNA-BULB RIVETS	AVDELQ RIVET
POP T RIVETS	MAGNA-LOK RIVET	AVDEL BULBEX RIVET
LOAD SPREADING POP RIVETS	MAGNA-TITE RIVET	AVDEL MONOBOLT RIVETS
POP MICRO RIVETS	HUCK AUTOBULB	AVDEL HEMLOCK RIVETS
See BRIV RIVETS, CHOBERT, and RivSCREW Speed Riveting - twice as fast as POP Rivets ...

Tip: The Advantages of using POP Rivets

POP rivets can be used where access at the back of the work piece is restricted or not accessible. This feature of the POP rivet alone makes their use a must in many applications. Their many advantages make POP rivets the best choice in applications where the POP installed rivet is not of primary importance, such as:

POP Rivets conform to IFI 114 Specifications
Low installation costs (POP Rivet vs. Bolts)
Faster assembly than a regular nut and bolt
Low in place cost (Reduce Cost of Labor)
Lightweight portable tools
POP Rivets are Vibration-proof
POP Rivets will not scratch surfaces
Versatile designs, many POP Rivet families
High fastening thickness range
POP Rivets have high clamping strengths
POP Rivets are Tamperproof
POP offers design flexibility

More Information

POP Rivet: Factors to consider
POP Rivets: General Design Practice
POP Rivets: Cross Reference Chart
POP Rivets: Head Styles
POP Rivet Tools And Guns
How To Remove a POP Rivet
Custom Rivets, Painted Rivets, Colored Rivets Mil-Spec (MIL-R-24243)

Featured - How to POP Rivet - Visit the MicroSite

Blind POP Rivets
POP Rivets are 2 piece assemblies consisting of the POP rivet body and the accompanying setting mandrel, and are capable of being set from the front side of the application, access to the back side or blind side is not necessary. POP Rivet uniqueness means fastening with limited to access to one side of the structure. Current POP rivet applications have expanded to many additional areas of fastening to decrease labor expense and to address the ergonomic issues of solid riveting and nuts and bolts.

How POP Rivets Work

The POP rivet body is inserted in a hole in the materials to be joined.
The tool is actuated and the jaws of the power-operated or manual or power POP® rivet tools hold the mandrel of the rivet.
The POP rivet is set by pulling the mandrel head into the rivet body, expanding it, and forming a strong, tight, reliable joint on the back side of the application (forming the secondary clamp). At a predetermined setting force, the mandrel breaks leaving a tightly fastened joint..

TANGLESS® is a registered trademark of Advanex Inc.
POP Rivet® is a registered trademark of Emhart Teknologies, LLC.
Recoil® is a registered trademark of Alcoa.