|
|
|
|
Kato Coilthread inserts are 100% compatable with
Heli-Coil® Inserts.
Manufacturers of helically wound inserts include Emhart
Teknologies - HeliCoil Inserts, Kato Tangless Inserts and Alcoa/Recoil
inserts.
Get
Kato Insert Specifications, RFQs - click here:
How
To Install a Kato Insert
Kato
Insert
Charts and Tables
Cross Reference To HeliCoil, Kato, Mil Spec, etc
Kato has been
manufacturing conventional tanged CoilThread inserts for
over 30 years!
CoilThread tanged inserts are made of cold-rolled 304
stainless steel wire (AS7245), work-hardened to a
tensile strength above 200,000 psi, and a hardness of Rc
43-50. The finished surface (8-16 micro-inches) is
exceedingly smooth, virtually eliminating
friction-induced thread erosion.
Heli-Coil is the
approved Screw-Lock Screw Thread Insert source for
Boeing Aircraft per specification
BACI12AE rev B. |
Kato employs:
- Precision engineering,
- Exacting manufacturing
standards,
- Stringent quality control
procedures assure a high quality product that meets or
exceeds all applicable military and aerospace standards
This results in a Kato insert
that less expensive than competitive inserts such HeliCoil
Inserts or Recoil Inserts! Our inserts meet Mil-Spec
and Aerospace standards and have full lot traceability.
We carry a full range of free running inserts, locking
inserts, and tangless inserts in bulk and on strip feed
reels, along with all the required installation
tooling providing flexibility for your manufacturing
environment. With 30 years experience we can offer
design and application assistance. We have a Full line
of taps, gages, hand tools, air tools, and electric tools
available...100% interchangeable and will install HeliCoil,
Microdot, Recoil and all other major brands of inserts.
The Kato Guarantee: Try Kato
CoilThread Inserts...You have nothing to lose!.
TANGLESS® is a registered
trademark of Advanex Inc.
POP Rivet® is a registered
trademark of Emhart Teknologies, LLC.
HeliCoil® is a registered trademark of Emhart Teknologies, LLC.
Recoil® is a registered
trademark of Alcoa. |
|
